Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Intake Air Temperature Sensor: Testing and Inspection
Intake Air Temp (IAT) Sensor (Dynamic Chamber) Inspection
1. Remove the IAT sensor (dynamic chamber).
2. Place the sensor and a thermometer in the water.
Specification
3. Gradually heat the water and measure the resistance of the sensor using an ohmmeter.
-
If not as specified, replace the IAT sensor (dynamic chamber).
Tightening torque:
7.9 - 11.7 N.m {80 - 120 ft.cm, 70 - 104 in.lb}