Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-174001.png)
Manifold Pressure/Vacuum Sensor: Testing and Inspection
MAP Sensor Solenoid Valve Inspection
MAP SENSOR SOLENOID VALVE INSPECTION [KJ]
1. Remove the MAP sensor solenoid valve.
2. Blow air into each port and verify that air flows as specified below.
^
If not as specified, replace the MAP sensor solenoid valve.
Specification
3. Apply battery positive voltage between the terminals of the MAP sensor solenoid valve.
4. Blow air into each port and verify that air flows as specified below.
^
If not as specified, replace the MAP sensor solenoid valve.
Specification
