mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Removal/Installation|Page 3179 > < Removal/Installation
Page 2
background image

KJ

1. Remove the charge air cooler. (KJ)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.

CAUTION:
-

Reversing the battery connections or using high-voltage testers will damage the rectifier.

-

Do not start the engine while the connector is disconnected from terminals L and S. it can damage the generator.

-

Disconnecting generator terminal B before disconnecting the negative battery cable can damage the generator harness and connector.

NOTE:  Battery positive voltage is always present at generator terminal B while the battery cable is connected.

A/C Compressor Removal Note

With the pipe still connected, position the A/C compressor away from the generator for easy access to the generator.

Removal/Installation|Page 3179 > < Removal/Installation