Mazda Workshop Service and Repair Manuals > Millenia S V6-2.3L DOHC (Miller cycle) (2000) > Steering and Suspension | Alignment | System Information | Service and Repair | Pre-Alignment Inspection

Page 3

4. Tighten the tie rod locknuts to the specified torque.

Tightening torque

69 - 98 Nm (7.0 - 10.0 kgf m, 51 - 72 ft. lbs.)

5. Verify that the boot is not twisted, and install the boot clamp.

Mazda Workshop Service and Repair Manuals