Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1162001.png)
Tilt Wheel Switch: Service and Repair
TILT SWITCH REMOVAL/INSTALLATION
1. Remove the combination switch.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
TILT SWITCH REMOVAL NOTE
1. Remove the screws.
2. Release the tabs of the tilt switch from the turn lever boot.
3. Slide the tilt switch in the direction indicated by the arrow, then remove it along the turn lever.
TILT SWITCH INSTALLATION NOTE
