Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Tightening torque
44 - 60 Nm (4.4 - 6.2 kgf-m, 32 - 44 ft. lbs.)
BOLT (INTERMEDIATE SHAFT) INSTALLATION NOTE
1. Align the marks as shown.
2. Install the intermediate shaft so that the universal joint can is alined with the marks.
3. Tighten the bolt.
Tightening torque
16 - 26 Nm (1.8 - 2.7 kgf-m, 14 - 19 ft. lbs.)