Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1166002.png)
1. Disassemble in the order indicated in the table.
TIE-ROD END DISASSEMBLY NOTE
1. Before removing the tie-rod end, mark the tie-rod end, locknut, and tie rod for proper reassembly.
TIE-ROD END BOOT DISASSEMBLY NOTE
1. Secure the tie-rod end in a vise.
2. Place a chisel against the boot and hold it at the angle shown.
3. Remove the boot by tapping with a hammer.
