Millenia S V6-2.3L DOHC (Miller cycle) (2000)
/Page-1177001.png)
Lateral Stabilizer Rod: Service and Repair
Leading Link (Front Upper)
UPPER LEADING LINK REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
UPPER LEADING LINK BALL JOINT REMOVAL NOTE
1. Install the Special Service Tools (SSTs) to the ball joint.
2. Tighten the bolt of the SST to 13.8 - 15.6 Nm (140 - 160 kgf-cm, 122 - 138 inch lbs.).
Caution
