Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Stabilizer Bar: Service and Repair
Rear
REAR STABILIZER REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
STABILIZER BUSHING INSTALLATION NOTE
1. Apply rubber grease to the inside surface of the stabilizer bushing.
2. Align the bushing with the stopper on the stabilizer.
STABILIZER CONTROL LINK INSPECTION
1. Inspect for bending and damage.
2. Measure the ball joint starting torque.
1. Rock the ball joint stud side to side 10 times.
2. Rotate the ball joint stud 10 times.