Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
FRONT SHOCK ABSORBER AND COIL SPRING REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
NUT REMOVAL NOTE
Warning Removing the mounting rubber nut is dangerous. The shock absorber and spring could fly off under tremendous pressure and
cause serious injury or death. Secure the shock absorber in the SST before removing the mounting rubber nut.
Caution To prevent damage to the mounting rubber, use protective plates in the vise jaws.