Millenia S V6-2.3L DOHC (Miller cycle) (2000)
Trailing Arm: Service and Repair
LOWER TRAILING LINK, UPPER TRAILING LINK REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
LOWER TRAILING LINK BALL JOINT REMOVAL NOTE
1. Install the Special Service Tools (SSTs) to the ball joint.
2. Tighten the bolt of the SSTs.
Tightening torque
Lower trailing link
34 - 35 Nm (3.4 - 3.6 kgf-m, 25 - 26 ft. lbs.)
Upper trailing link
13.8 - 15.6 Nm (140 - 160 kgf-cm, 122 - 138 inch lbs.)