MPV L4-2606cc 2.6L SOHC (1989)
Brake Proportioning/Combination Valve: Testing and Inspection
Load Sensing Proportioning Valve
Fig. 16 LSPV Pressure Chart
Fig. 17 LSPV Adjustment
1.
Place vehicle on level ground. Ensure tire inflation is correct. Place a person in the driver's seat and fill gas tank.
2.
Connect pressure gauge to left front and left rear caliper/wheel cylinders. Bleed air from system.
3.
Slowly depress brake pedal until pressure at front meets that in chart, Fig. 16.
4.
At that time the rear pressure should be as in Fig. 16. If not, adjust valve as follows:
a. Adjust control spring dimension, Fig. 17. Decrease dimension L if fluid pressure is low. Increase dimension L if fluid pressure is high. A
change of .197 inch will change pressure 57 psi.
