MPV L4-2606cc 2.6L SOHC (1989)
Parking Brake Lever: Service and Repair
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal indicated in the table.
^
Tighten mounting bolts to 19 - 25 Nm (14 - 18 ft.lbs.).
NOTE:
^
Install the parking brake switch so that it contacts the parking brake lever when the lever is fully released.
^
Turn the ignition switch to ON, and check that the parking brake warning light illuminates with the lever pulled one notch.
3. After installation, check the parking brake lever stroke.
