MPV L4-2606cc 2.6L SOHC (1989)
Chain Guide And Lever
3. Push the chain adjuster sleeve in and insert pin into lever hole to secure. Install chain adjuster and torque to 70-95 in.lbs (8-11 Nm).
Chain Adjuster Pin Installation
4. Install key onto crankshaft.
Crankshaft Key Assembly
5. Install timing chain and timing gear as shown.
Fig. 12 Timing Chain Installation
6. Install camshaft pulley so timing mark on pulley aligns with white link of timing chain and secure camshaft pulley to timing chain with wire and
temporarily rest it between chain lever and guide as shown.
