MPV V6-3.0L DOHC (2002)
15.
Locate the Evap Canister and Pump assembly under the driver's seat area.
16.
Remove the black plastic cover by removing the three (3) mounting bolts.
17.
Disconnect the evap pump connector, 1 small hose, and 3 large hoses (as shown).
18.
Discard old white hose joint.
19.
Remove the three (3) bolts holding the canister bracket to the body.
20.
Set canister bracket on work bench.
21.
Disconnect the two (2) large hoses from the canister.
NOTE:
Leave the small center hose attached to the canister.
