MPV V6-3.0L DOHC (2002)
Tightening torque: 3.0 - 5.4 N.m {30 - 56 kgf.cm, 27 - 48 in.lbf}
4. Inspect the wiring harness for open or short (Continuity check).
Open circuit
-
If there is no continuity, the circuit is open. Repair or replace the harness.
-
EGR boost sensor terminal C (harness-side) and 104 pin breakout box terminal 90
-
EGR boost sensor terminal B (harness-side) and 104 pin breakout box terminal 34
-
EGR boost sensor terminal A (harness-side) and 104 pin breakout box terminal 91
Short circuit
-
If there is continuity, the circuit is shorted. Repair or replace the harness.
-
EGR boost sensor terminal C (harness-side) and power supply
-
EGR boost sensor terminal C (harness-side) and body ground
-
EGR boost sensor terminal B (harness-side) and power supply
-
EGR boost sensor terminal B (harness-side) and body ground
-
EGR boost sensor terminal A (harness-side) and power supply