MPV 2WD V6-3.0L SOHC (1992)
2.
Inspect the nuts.
^
If only the nuts are loose, proceed to step 3.
^
If the nuts have fallen off, retrieve them from inside the door and re-use. Proceed to step 3.
3.
Reinstall the door handle mounting nuts using non-permanent Loctite on threads and tighten to specified torque.
Tightening Torque: 4.2-6.2 Nm (0.43-0.63 kgfm, 3.1 - 4.6 ft-lbs)
CAUTION:
Do Not Over Torque Nuts. This May Cause Them To Loosen Again.
4.
Verify repair.
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information)
Warranty Type:
A
Symptom code:
82
Damage code:
9G
Part Number Main Cause:
9090-60-611
Quantity:
0
Operation Number:
S1013XRX (Front Door - qty. 1)
S1113XRX (Rear Door - qty. 1)
Labor Hours:
Refer to the SRT Microfiche
DISCLAIMER
Technical Service Bulletin # S01996
Date: 960909
