MPV 2WD V6-3.0L SOHC (1992)
(Rear) 1990-'92
New
..................
18.0 mm (0.71 in)
Minimum
..............
16.0 mm (0.63 in)
(Rear) 1989
New
..................
10.0 mm (0.39 in)
Minimum
..............
8.0 mm (0.31 in)
Brake Drum Inspection:
Most brake drums DO NOT require replacement. Only drums containing deep grooves or blue (hot) spots should be replaced. Drums not showing these
signs should be resurfaced by means of machining as long as the maximum inside diameter is not exceeded.
NOTE:
Maximum allowed drum inside diameter is stamped on the exterior drum surface.
Brake Drum Specification:
MPV 1989-'92
Inside Diameter (New) ... 260.0 mm (10.24 in)
Inside Diameter (Max.) .. 261.5 mm (10.30 in)
B-Series 1989-'92
Inside Diameter (New) ... 260.0 mm (10.24 in)
Inside Diameter (Max.) .. 261.5 mm (10.30 in)
Navajo 1991-'92
Inside Diameter (Max.) .. 256.3 mm (10.09 in)
323/Protege' 1989 & '92
Inside Diameter (New) ... 200.0 mm (7.87 in)
Inside Diameter (Max.) .. 201.0 mm (7.91 in)
323/Protege' 1990 & '91
Inside Diameter (New) ... 228.6 mm (9.00 in)
Inside Diameter (Max.) .. 229.6 mm (9.04 in)
MX-3 1992
Inside Diameter (New) ... 200.0 mm (7.87 in)
Inside Diameter (Max.) .. 201.0 mm (7.91 in)
626/MX-6 1989-'92
Inside Diameter (New) ... 228.6 mm (9.00 in)
Inside Diameter (Max.) .. 230.1 mm (9.06 in)
