MPV 2WD V6-3.0L SOHC (1992)
Valve Cover Gasket: Service and Repair
CYLINDER HEAD VALVE COVER
Removal
1. Disassemble in the order shown in the figure
Installation.
1. Remove all old silicon sealant from the cylinder head and cover.
2. Coat a new gasket with silicone sealant, and install onto the cylinder head cover.
3. Install the cylinder head cover with new seal washers.
Tightening Torque: 3.4-4.4 N.m (35-45 cm-kg, 30-39 in-lb).
