MPV 2WD V6-3.0L SOHC (1992)
12. Install the timing belt covers along with new gaskets.
Tightening torque:
M6 : 7.9-10.1 N.m {80-110 kgf.cm, 70-95.4 in.lbf }
M10: 38-51 N.m {3.8-5.3 kgf.m, 28-38 ft.Ibf}
Drive belt
Install each drive belt, and check the belt deflection. (Refer to Drive Belts Service and repair (Drive Belts,Mounts, Brackets and Accessories).
See: Drive Belts, Mounts, Brackets and Accessories
Crankshaft Pulley
1. Set the SST against the flywheel (M/T) 0r drive plate (A/T).
2. Install the crankshaft pulley and lock bolt.
Tightening torque: 157-167 N.m (16-17 m-kg, 116-123 in-lb).
3. Reverse the direction of the SST and remove the SST.
Steps After Installation
1. Fill the radiator and coolant reservoir with the specified amount and type of engine coolant.
2. Perform the necessary engine adjustment. (Refer to Maintenance, Tune-up Procedure.)
