MPV 2WD V6-3.0L SOHC (1992)
Intake Air Temperature Sensor: Testing and Inspection
Air Intake Thermosensor Inspection
The computerized control system on this vehicle utilizes a second intake air thermosensor located in the airflow meter. Refer to AIRFLOW METER in
this section.
1. Disconnect intake air thermosensor connector.
2. Connect an ohmmeter to sensor terminals.
3. Check sensor resistance. Normal sensor resistance measurements are as follows:
K OHMS
AIR TEMP.
29.7 - 36.3
25°C / 77°F
10.5 - 12.9
50°C / 122°F
3.3 - 3.7
85°C / 185°F