MPV 2WD V6-3.0L SOHC (1992)
NOTE:
If battery tester displays one of the three results shown, perform a one (1) time quick recharging for 30 minutes, repeat Steps 1 - 5, retest, then
follow the Action Step for the displayed result.
6.
Generate a DTC by performing the following steps:
NOTE:
These steps are required when submitting a Mazda warranty claim for battery replacement.
a.
Press the "i" icon.
b.
Enter the Warranty RO number by using the UP and DOWN buttons to scroll to the correct character, then press ENTER to select each
character.
c.
Enter the RO Line Number by using the UP and DOWN buttons to scroll to the correct character, then press ENTER to select each
character.
d.
Press ENTER when complete to view the Warranty Approval Code.
e.
Press ENTER again to view the DTC Code.
7.
To print test results for attachment to RO, perform the following steps:
a.
Turn off the battery tester by disconnecting the battery test leads from the battery.
b.
Align the infrared ports of the battery tester and the printer.
c.
With the tester off press and hold the print button to activate the OPTION menu.
d.
Use the UP and DOWN arrows to scroll to PRINT RESULTS, then press the ENTER button.
NOTE:
^
The tester will print the results from the last battery test completed.
^
If the tester results do not print, verify that the infrared IR port of the tester is pointing correctly at the infrared IR port of the printer.
