MPV 4WD V6-180 2954cc 3.0L FI (1989)
Brake Drum: Technical Service Bulletins
Brake Rotor/Drum - Inspection Criteria
Bulletin No.: 005/91
Issued: 10/14/91
Revised
Category
P
Applicable Model/s
1989-'91 MPV
Subject:
BRAKE ROTOR/DRUM INSPECTION CRITERIA (MPV EXCLUSIVE)
DESCRIPTION
When inspecting the brake rotor or drum for wear, refer to the following Inspection Procedure to determine if a rotor/drum can be resurfaced by
machining.
INSPECTION PROCEDURE
Brake Rotor Inspection:
Many rotors have been replaced unnecessarily for brake noise. If the rotors do not contain cracks or deep grooves, and the remaining rotor thickness
allows for machining, the rotors should be resurfaced.
NOTE:
Minimum allowed rotor thickness is stamped on rotor surface.
Brake Drum Inspection:
