MPV 4WD V6-180 2954cc 3.0L FI (1989)
2.
Connect the 3 vacuum hoses (a, b and c) of the vacuum tube assembly (3) to the solenoid valve assembly (2) as shown.
3.
Install the solenoid valve assembly using the nut (5) at the position shown. If the vehicle is equipped with auto cruise control, install the solenoid
valve assembly on the auto cruise cable bracket using double nuts.
4.
Route vacuum hoses (a and b) to the throttle body as shown.
5.
Disconnect the original vacuum hose from the throttle body and connect the vacuum hose (a) to the throttle body.
6.
Attach hose connector (d) to the head of the blue-marked vacuum hose (b) and connect the original vacuum hose to the connector (d).
