MPV 4WD V6-180 2954cc 3.0L FI (1989)
Evaporative Check Valve: Service and Repair
Check-and-Cut Valve
Fig. 82 Separator/Check And Cut Valve
WARNING: Before performing the following procedure, release the fuel pressure from the fuel system. To reduce the possibility of injury or fire,
keep sparks cigarettes and open flame away from the fuel when removing parts.
1.
Pull back the right rear side interior trim panel.
2.
Remove the cover.
3.
Mark the hose locations and disconnect the hoses.
4.
Remove the check-and-cut along with the separator and two-way check valve valve.
5.
Remove the check-and-cut valve.
6.
Install in reverse order.
NOTE:
When connecting the hoses, be sure to connect them in the correct positions.
