mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Other Service Bulletins for Alignment: > < Wheel Alignment - Revised Caster Adjustment Procedure|Page 4538
Page 7
background image

NOTE:

When the vehicle pulls to the right side, move the right side of the crossmember forward to increase the right caster angle. At the same time, move
the left side of the crossmember backward to decrease the left caster angle. Figure 1.

If the vehicle pulls to the left side, the procedure is opposite of the steps above.

10.

Tighten the nuts which mount the crossmember to the body.*

11.

Retest vehicle for pulling.

* The revised sections are indicated by an asterisk. Please replace the original bulletin with this revised bulletin.

WARRANTY INFORMATION *

Warranty Type Code:

A

Customer Comment Code:

32

Damage Code:

9H

Part No. of Main Cause:

5555 FE 001
MPV

929

Operation No.:

XX0454RX

XX0455RX

Labor Hours:

1.2 Hrs.

1.3 Hrs.

All Other Service Bulletins for Alignment: > < Wheel Alignment - Revised Caster Adjustment Procedure|Page 4538