MPV 4WD V6-180 2954cc 3.0L FI (1989)
Before removing the pressure pipe make marks for reference during installation.
Steering bracket mounting bolt
With an automatic transmission, remove the change counter assembly to remove the protector plate mounting bolt indicated by the arrow.
INSTALLATION
1. Install in the reverse order of removal, referring to Installation Note.
2. Lighten all necessary bolts and nuts to the specified torque.
3. After installation:
(1) Check for fluid leakage.
(2) Bleed air from the system.
Installation Note:
Mounting bracket bolts
Tighten the mounting bracket bolts in the order shown in the figure.
