MPV 4WD V6-180 2954cc 3.0L FI (1989)
Shift Indicator: Technical Service Bulletins
A/T Position Indicator - Adjusting Pointer After Repair
Category
Applicable Model/s
7
1989 MPV
Subject
Bulletin No.
055/89
ADJUSTMENT OF A/T
Issued
5/25/89
POSITION INDICATOR
Revised
DESCRIPTION
There is a possibility that the pointer of the A/T position indicator can come out of position when the instrument cluster is removed and reinstalled or the
shift lever linkage and/or related parts are replaced.
Methods of adjusting this pointer are not clearly mentioned in the latest Workshop Manual and it does not mention that it is necessary to use an adjusting
pin to set the pointer in its correct position.
Adjust the A/T position indicator using the adjusting pin provided and referring to the procedures listed in this Service Bulletin.
ADJUSTMENT PROCEDURES
1.
Remove the instrument cluster as shown in the figure.
