mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Map Box - Will Not Stay Closed|Page 5034 > < Map Box - Will Not Stay Closed|Page 5028
Page 1
background image

Map Pocket: All Technical Service Bulletins
Map Box - Will Not Stay Closed

Bulletin No.: 021/93
Issued: 5/19/93
Revised:

Category

S

Applicable Model/s
1988 - 93 MPV

Subject
MAP BOX WILL NOT STAY CLOSED

APPLICABLE MODELS/VINS 

MPV MODELS

1989 - Vehicles with a VIN of JM3LV****K0100001 through JM3LV****K0999999

1990 Vehicles with a VIN of JM3LV****L0200001 through JM3LV****L0299999

1991 - Vehicles with a VIN of JM3LV****M0300001 through JM3LV****M0399999

1992 - Vehicles with a VIN of JM3LV****N0400001 through JM3LV****N0499999

1993 - Vehicles with a VIN of JM3LV****P0500001 through JM3LV****P0508582

DESCRIPTION

The map box door button sticks and prevents latching the map box door in a closed position. To correct this problem, the map box button's length was
increased by 2 mm to provide secure latching.

REPLACEMENT PROCEDURE

1.

Depress the map box button to open the box. Lift the door up and out of the slots in which it rests and allow it to hang straight down by the cloth
hinges.

Note:

You do not need to completely remove the map box door to perform this operation.

2.

Swing the door upward and remove the 11 screws from the inside of the door. Remove the door cover to expose the button's locking mechanism.
Set the cover aside

3.

Allow the door to hang downward. Be sure to hold the locking mechanism in place so it doesn't fall out of the door's back half.

4.

Remove the button from the locking mechanism and replace it with a modified one.

Map Box - Will Not Stay Closed|Page 5034 > < Map Box - Will Not Stay Closed|Page 5028