MPV 4WD V6-3.0L SOHC (1990)
Roof Rack Frame: Technical Service Bulletins
Roof Rack - Installation
Category 20
Applicable Model/s 1990 MPV
Subject ROOF RACK INSTALLATION
Bulletin No.
006/89
Issued
12/29/89
Revised
DESCRIPTION
Due to the curvature of the MPV roof, the rear portion of the roof rack must be held down firmly against the roof during installation of the rear well nuts.
If the rear well nuts do not seat correctly, the threaded rubber inserts will work themselves loose, causing noises, damage to the finish and a potential
water leak.
When installing a roof rack, follow the provided instructions and pay close attention to the rear well nuts, making sure they are firmly in place before
releasing the vehicle to the customer.
PARTS INFORMATION
Luggage Rack - 0000 88 1061
