MPV 4WD V6-3.0L SOHC (1990)
Brake Pad: All Technical Service Bulletins
Brakes, Front - Pulsating
Bulletin No.
002/91
Issued
3/8/91
Revised
Category
P
Applicable Model/s
1989-'91 MPV
Subject
BRAKE PULSATION
DESCRIPTION
The front brake pad material has been changed since November 8, 1990 production. If you encounter a vehicle with pulsating brakes, premature wear, or
noise, install new front pads with the replacement pad set listed. Inspect and replace the shims if the rubber coating shows that damage has occurred
aside from normal installation. Clean up the rotor(s) surface. If the rotor(s) thickness is less than the minimum required thickness of 22.00 mm (.87 in),
replace the rotors.
VIN OF PRODUCTION CHANGE
PARTS INFORMATION
