MPV 4WD V6-3.0L SOHC (1990)
Idle Speed: Adjustments
PREPARATION
1.
Check engine condition (spark plugs, leaks in hoses, etc.).
2.
Turn all electrical loads "OFF."
3.
Warm engine to normal operating temperature.
ADJUSTMENT
Test Connector
1.
Connect a tachometer to engine.
2.
Ground test connector (green: 1-pin) with a jumper wire.
3.
Check that idle speed is within specifications:
800 ± 20 rpm (M/T: neutral, A/T: P range)
Idle Adjustment
4.
If idle speed is not within specification, remove blind cap from air adjusting screw and turn screw to adjust.
5.
After adjustment, disconnect jumper wire from test connector and replace blind cap.