mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Customer Interest: > < Interior Lamp - Inoperative|Page 5207
Page 1
background image

Door Switch: All Technical Service Bulletins
Interior Lamp - Inoperative or ON All The Time

Bulletin No.: 023/92
Issued: 3/4/92
Revised

Category

S

Applicable Model/s
1989-'91 MPV

Subject:
DOOR SWITCH

DESCRIPTION

An inoperative interior lamp may be caused by a broken actuator rod in the door switch. Symptoms include an interior lamp that stays "on" or does not
come "on" at all.

Switches with reinforced actuator rods have been included in vehicles produced since January 16, 1991 VIN below).

The actuator rod is not available as a service part. The switch assemblies must be replaced.

VIN OF PRODUCTION CHANGE

JM3LV****M0332751 January 16, 1991

REPAIR PROCEDURE

Replace the door switch according to Workshop Manual procedures in Section S.

PARTS INFORMATION

WARRANTY INFORMATION
(Applies to vehicles covered under warranty.)

Warranty TYPE Code:

A

Customer Comment Code:

61 (does not switch "on") or
62 (does not switch "off")

Damage Code:

9A

Part No. of Main Cause:

LA01 66 540

Quantity:

1

Operation No:

T0210XRX

Labor Hour:

0.2 Hr.

Customer Interest: > < Interior Lamp - Inoperative|Page 5207