MPV 4WD V6-3.0L SOHC (1990)
Dome Lamp Bulb: All Technical Service Bulletins
Room Lamp - Does Not Illuminate
Bulletin No.: 016/97
Issued: 12/28/97
Revised:
Category
T
Applicable Model/s
All Models
Subject:
ROOM LAMP DOES NOT ILLUMINATE
APPLICABLE MODELS
All Models
DESCRIPTION
The room lamp does not illuminate. Even if the bulb is replaced with a new one, the problem may recur. The cause for this is the caulking of 10W bulb
filament is loosened by heat. Poor connection of bulb holder may also cause this concern on the center interior light (MPV only).
The filament terminal material and filament configuration have been changed. Refer to Fig. 1.
