MPV 4WD V6-3.0L SOHC (1990)
WARRANTY INFORMATION *
Warranty Type Code:
A
Customer Comment Code:
32
Damage Code:
9H
Part No. of Main Cause:
5555 FE 001
MPV
929
Operation No.:
XX0454RX
XX0455RX
Labor Hours:
1.2 Hrs.
1.3 Hrs.
Technical Service Bulletin # R01192
Date: 920703
Steering/Alignment - Vehicle Pulls Left or Right
Bulletin No.: 011/92
Issued: 6/8/92
Revised: 7/3/92
Category
R
Applicable Model/s
1988-'91 929
1989-'92 MPV*
Subject:
WHEEL ALIGNMENT (CASTER ANGLE) ADJUSTMENT PROCEDURE
DESCRIPTION
Some 1988-'91 929 and 1989-'92 MPV models may pull to the right or the left. This may be caused by incorrect caster setting or a difference in wheel
base dimensions due to improper crossmember installation.* Follow the procedures in this bulletin to correct this problem.
INSPECTION & REPAIR PROCEDURE
NOTE:
Steps 1 and 2 must be performed prior to suspension adjustment.
1.
Adjust tire pressure as recommended in the Workshop Manual.
2.
Inspect vehicle for damage to suspension and related components.
3.
If damage to suspension or components is found, repair and retest for pulling.
4.
Rotate the left and right front tires.
5.
Align according to the Workshop Manual, Section R.
6.
While aligning, if caster angle will not adjust to the proper specification, proceed to step 7. if the proper caster angle is achieved, proceed to step
11*
7.
Measure wheelbase side-to-side. Follow steps 8 through 10 until the wheel base dimension is within 1/4" (6.35 mm).*
8.
Remove the vehicle's plastic undercover.
9.
Loosen the nuts that mount the crossmember to the body.*