MPV 4WD V6-3.0L SOHC (1990)
Air Flow Meter/Sensor: Technical Service Bulletins
Air Flow Meter - Service Precautions
Bulletin No.: 028/96
Issued: 12/26/96
Revised:
Category
F
Applicable Model/s
See Below
Subject:
VANE TYPE AIR FLOW METER CONNECTOR HANDLING
APPLICABLE MODELS
All models with vane type air flow meters.
DESCRIPTION
Vane type air flow meters disconnected during driveability problem diagnostics may become damaged during connector disconnection.
To avoid unnecessary replacement, follow the procedures below to properly remove vane type air flow meter connections.
Service Managers should place a copy of this bulletin in section F of the applicable workshop manuals.
NOTE:
Air flow meter replacement due to connector circuit damage may result in warranty claim denial.
CONNECTOR REMOVAL PROCEDURE
CAUTION:
DO NOT remove the two (2) screws on the air flow meter. Removing these screws and pulling on the connector will damage the air flow meter
circuitry.
This instruction applies to other type air flow meters as well.
