MPV 4WD V6-3.0L SOHC (1990)
Inspection
Wheel bearing play
Position a dial indicator against the disc plate. Push and pull the disc plate by hand in the axial direction and measure the wheel bearing play. If the
bearing play exceeds specification, check and adjust the hub nut torque or replace the wheel bearing and hub assembly if necessary. Maximum
wheel bearing play:
0.05 mm { 0.002 in }
Installation note: Install a new locknut and crimp it. Tightening torque: 177-235 N.m { 18-24 kgf.m, 131-173 ft.Ibf }
Disassembly Note: The hub bolts do not need to be removed unless you are replacing them. Remove the hub bolts with a press if necessary.
Dust cover Note: The dust cover does not need to be removed unless you are replacing it.
1. Mark the dust cover and knuckle spindle for proper reassembly.
2. Remove the dust cover with a chisel.
Dust cover Assembly note
