mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - New Style Inhibiter Switch|Page 3808 > < Overdrive Switch, A/T|Locations
Page 1
background image

Shift Interlock Switch: Technical Service Bulletins
A/T - New Style Inhibiter Switch

Bulletin No.: 002/93
Issued: 5/05/93
Revised: 9/16/93

Category

K

Applicable Model/s
B-Series & MPV

Subject:
NEW INHIBITOR SWITCH

NOTE:

This bulletin supercedes Service Bulletin # 019/92, Cat. K, issued 11/30/92.

The revised portion of this bulletin is indicated by an asterisk (*) Replace the original bulletin with this revised copy.

AFFECTED VINS
This bulletin applies to B-Series A/T vehicles with a VIN lower than JM2UF****P068762 and MPV A/T vehicles with a VIN lower than
JM3LV****P0500013.

DESCRIPTION

Starting with the August 1, 1992 production date, the A/T inhibitor switch has been changed from a two-coupler to a single-coupler configuration.

There is no supersession between the new and old style configurations. When replacing the A/T inhibitor switch or ordering a replacement transmission,
be sure to order the part with an inhibitor switch that will fit the vehicle harness.

A/T - New Style Inhibiter Switch|Page 3808 > < Overdrive Switch, A/T|Locations