MPV DX V6-2.5L DOHC (2000)
Antenna Cable: Testing and Inspection
ANTENNA FEEDER INSPECTION
1. Disconnect the negative battery cable.
2. Remove the audio unit.
3. Remove the passenger-side side panel.
4. Disconnect the connection between the antenna and the antenna feeder.
5. Verify that there is no continuity between the antenna feeder terminals A and B using an ohmmeter.
-
If not as specified, replace the antenna feeder.
6. Inspect for continuity between the antenna feeder terminals using an ohmmeter.
-
If not as specified, replace the antenna feeder.
