MPV DX V6-2.5L DOHC (2000)
2. Loosen locknut D and turn rod C to align the holes in the fork and in the pedal.
3. Install the clevis pin and the spring pin.
4. Tighten locknut D.
Tightening torque
11.8 - 16.6 Nm (120 - 170 kgf-cm, 105 - 147 ft. lbs.)
5. Check the pedal height and the brake light operation.
PEDAL-TO-FLOOR CLEARANCE INSPECTION
1. Start the engine and verify that the distance from the floor panel to the pedal pad center is as specified when the pedal is depressed.
^
If the distance is less than specified, check for the air in brake system.
Specification
113 mm (4.45 inch) min.