MPV DX V6-2.5L DOHC (2000)
Hydraulic Control Assembly - Antilock Brakes: Testing and Inspection
Preparation
System Inspection Preparation
1. Verify that the battery is fully charged. With the ignition switch on, verify that the ABS and BRAKE system warning lights goes out after 3
seconds.
2. If the lights stays on after 3 seconds, the ABS HU/CM detects a failure. Follow the troubleshooting procedures.
3. Turn the ignition switch off.
4. On level ground, jack up the vehicle and support it evenly on safety stands. Shift the transaxle to N position.
5. Release the parking brake.
6. Rotate the wheels by hand, and inspect for brake drag.