MPV DX V6-2.5L DOHC (2000)
Air Door Actuator / Motor: Service and Repair
Air Intake Actuator
Actuator
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Actuator Crank
1. Remove the glove compartment.
2. Disconnect the airflow mode wire from the airflow mode link.
3. Remove in the order indicated in the table,
4. Install in the reverse order of removal.
NOTE: Apply silicone grease or all-purpose grease to each link.
5. Adjust the airflow mode wire.