MPV DX V6-2.5L DOHC (2000)
Terminal voltage table (Reference) - Pinouts (I - P)
3. Measure the voltage at each rear climate control unit terminal and refer to terminal voltage list.
-
If not as specified, inspect the appropriate area.
-
If the inspection area is okay, replace the rear climate control unit.
4. Disconnect the rear climate control unit connector before inspecting for continuity at terminals C, E and J.
With A/C Only or Heater Only
1. Remove the rear climate control unit.
2. Connect the battery positive voltage to terminal B and ground to terminal A.
