MPV DX V6-2.5L DOHC (2000)
5.
Remove the seeping side of the rear heater pipe according to Workshop Manual (section 07-11 HEATER PIPE AND HOSE COMPONENT
REMOVAL/INSTALLATION).
NOTE:
IT IS NOT NECESSARY TO REMOVE THE FRONT CROSSMEMBER AND STABILIZER BAR TO REMOVE THE REAR HEATER
PIPE (FRONT).
NOTE:
Do not reinstall the black plastic pipe cover. Cover will not be reused.
6.
If the rear-side of the rear heater pipe is seeping and needs to be replaced, inspect heater pipe attachment bracket for rust, corrosion, or breakage
after Rear Heater Pipe (Rear) is removed.
