MPV DX V6-2.5L DOHC (2000)
7.
Using a power cutting tool, cut top of bracket off leaving only welded bracket flanges.
WARNING:
Be sure to wear safety goggles when using power cutting/grinding tools.
CAUTION:
After cutting top of bracket off, grind any sharp edges off flanges.
8.
Place new bracket on top of welded flanges.
9.
Mark holes using new bracket as a template.
10.
Using a 4 mm drill bit, drill two (2) holes.
11.
Apply rust preventative sealer inside the new holes.
12.
Attach the new bracket to body using two (2) self-tapping screws.
13.
Once bracket is secured, apply silicon based sealer on top of screws and flanges.