MPV DX V6-2.5L DOHC (2000)
3. While looking through the inspection hole of the SST, insert the protruding part of the SST until it makes contact with the cage opening.
4. Use the SST to disconnect the plastic fuel hose from the fuel distributor by pulling the plastic fuel hose side.
NOTE: The plastic fuel hose can be disconnected easily from the fuel distributor by pulling the plastic fuel hose while maintaining the pressure of
the protruding part of the SST.
5. Remove the SST from the disconnected quick release connector.
6. Cover the disconnected quick release connector and fuel distributor with the vinyl sheets or the like to prevent it from being scratched or
contaminated with foreign material.
Fuel Injector Installation Note
1. Inspect the O-rings for damage.
-
If the O-ring is damaged, replace the fuel injector.
2. Apply a small amount of clean engine oil to the O-rings.
Plastic Fuel Hose Installation Note
1. Inspect the plastic fuel hose and fuel distributor sealing surface for damage and deformation, and replace as necessary.
-
If the quick release connector O-ring is damaged or has slipped, replace the plastic fuel hose.
2. Apply clean engine oil to the O-rings.
