MPV DX V6-2.5L DOHC (2000)
2. Place a chisel against the boot and hold it at the angle shown.
3. Remove the boot by tapping it with a hammer.
TIE ROD DISASSEMBLY NOTE
1. Unclamp the washer.
2. Remove the tie rod using the Special Service Tool (SST).
LOCKNUT (ADJUSTING COVER) DISASSEMBLY NOTE
1. Remove the locknut using the SST.
ADJUSTING COVER DISASSEMBLY NOTE
1. Remove the adjusting cover using the SST.
LOCKNUT (HOUSING COVER) DISASSEMBLY NOTE
1. Temporarily install the inner ball joint to prevent damage to the oil seal.
PINION SHAFT COMPONENT DISASSEMBLY NOTE
