MPV DX V6-2.5L DOHC (2000)
Shift Interlock Solenoid: Testing and Inspection
Key Interlock Solenoid Inspection
KEY INTERLOCK SOLENOID INSPECTION
Continuity Inspection
1. Disconnect the negative battery cable.
2. Remove the column cover.
3. Disconnect the key interlock solenoid connector.
4. Inspect for continuity between terminals A and B.
-
If there is no continuity, replace the key cylinder.
5. Connect the key interlock solenoid connector.
6. Install the column cover.
7. Connect the negative battery cable.
