MPV ES V6-2.5L DOHC (2001)
12. Once the primer is dry, apply sealant around the entire circumference to the edge of glass with a 11.0 mm {0.43 in} high and 5.0 mm {0.20 in}
wide bead of sealant.
13. Align the pins and install the glass on the body.
14. Verify that the gap along the each edge is as shown.
Gap
Upper edge: 2.2 mm {0.087 in}
Side edge: 5.5 mm {0.217 in}
Lower edge: 2.3 mm {0.091 in}
15. Press firmly inward on the glass to compress the sealant.
16. Install the liftgate lower trim.
17. Install the rear wiper arm and blade.