MPV ES V6-2.5L DOHC (2001)
Sunroof / Moonroof Relay: Testing and Inspection
SUNROOF RELAY INSPECTION
1. Connect the sun root switch connector.
2. Connect the negative battery cable.
3. Measure the voltage at the sunroof relay terminals as indicated below.
4. Disconnect the sunroof relay connector before inspecting for continuity at terminal 1I.
-
If not as specified, inspect the parts listed under "Action" and the related wiring harnesses.
-
If the parts and wiring harnesses are okay but the system still does not work properly, replace the sunroof relay.
Terminal Voltage Table
Terminal Voltage Table (Reference)